Skip to main content
GulfShore Collection

GulfShore 20

Built on our proven 20-foot hull, the GulfShore 20 features an optional specialized tunnel, a full transom, and lower-profile sides to deliver exceptional performance in extremely shallow water while maintaining impressive rough-water capabilities.

  • Starting Price $99,700
  • Length (at centerline) 20'
  • Beam 7'5"
  • Draft (loaded) 8"
  • Deadrise (at transom) 12°
  • Deadrise (at bow entry) 30°
  • Weight (w/o engine) 1,050 lbs.
  • Standard Fuel Capacity 40 Gallons
  • Recommended HP Range 115-175 HP
  • Gunwale Width 10'5"
  • Cockpit Depth (freeboard at aft cockpit) 12"
  • Cockpit Depth (freeboard at fwd cockpit) 13.5"
  • Cockpit Size 6'8" x 9'4"
  • Custom single-color hull, all composite, fully self-bailing; tunnel or non-tunnel
  • Three ss “pull-up” cleats (1 bow, 2 stern)
  • 1/2″ ss bow and transom lifting eyes
  • Two ss threaded garboard drains
  • All thru-hulls are titanium and ss and have composite ball valves
  • All compartments are plumbed overboard (no compartments drain into bilge)
  • All hatch opening have deep gutters with rubber gaskets for quietness and dryness
  • All empty chambers under cockpit floor are foam filled (closed cell)
  • Sea Dek under gunwale pads
  • Suzuki 150hp (digital throttle) (white or black)
  • Hydraulic tilt steering with SS knobbed steering wheel (with fingertip grip)
  • Hydraulic jack plate (6″ with turn signal style switch)
  • MinnKota Terrova 54″ 24V, 80lb, manual deploy, 2ea Group 27 batteries & 3-bank charger
  • 8ft Power-Pole Blade (transom mounted) (white or black)
  • Trim Tabs (9×12″, includes indicator switch)
  • 40 gal fuel tank with “Racor” fuel filter/water separator
  • One Group 27 cranking battery with heavy duty holding tray and Blue Sea battery switch
  • Two bilge pumps with automatic float switches
  • Live well pump (800gph) with intake filter, removable screen and composite ball valve
  • All wiring is marine tinned, and all connections have epoxy coated heat shrink connectors
  • Elevated composite console with powder coated aluminum tower (4 welded rod holders)
  • SIMRAD Electronics Package (includes 1ea NSS 9″ MFD, SS60 600W thru hull transducer, 2-1 active imaging transducer)
  • All navigation lights are LED Seating, Storage & Fishing Features
  • Powder coated poling platform with non-slip steps and two welded rod holders
  • Deluxe flip-bolster helm seat
  • Removable Cooler with Backrest (65qt. Cooler, backrest to elevated tower stand, includes matching seat and backrest cushion
  • Push pole holders (set of three, flush mount, flip-up)
  • Four ss flush mount rod holders (mounted on deck cap)
  • Under gunwale rod racks (holds 8 rods)
  • Custom integrated fish ruler
  • Raw water washdown (with ss outlet, coil hose, and quick disconnect)
  • One 37 gal release well/ live well & one 37 gal insulated cooler/fishbox
  • Armstrong removable watertight hatch for bilge access
  • Anchor Locker
  • Dry Storage
  • Rigging
  • Insulated Fish Box
  • Cooler/Seating
  • Bilge Access
  • Release Well
  • Leaning Post

Design

Purpose-built for shallow-water anglers; available with or without a tunnel and multiple layout options. Proven running surface that handles chop at high speeds with excellent balance.

Construction

All-composite modified-V hull (tunnel optional) with sprayed-on gelcoat non-skid finish. Self-bailing deck with wide customization range.

Water Capability

Excels in shallow flats yet handles inshore and moderate-to-heavy chop with confidence and a smooth, solid ride.

Additional Options & Upgrades

Engine Upgrades *The following are upgrades from the standard Suzuki 150hp (Digital throttle) (white or black)
  • Suzuki 175hp 4-stroke (Digital throttle)
  • Mercury 150hp Pro XS (Mechanical)
  • Mercury 175hp Pro XS (Mechanical)
  • Yamaha 150hp SHO (Mechanical)
  • Yamaha 175hp SHO (Mechanical)
  • Upgrade trim tabs to Lenco Pro Control Auto System
  • Jackplate indicator (NMEA 2000)
Trolling Motor Upgrades & Options *The standard trolling motor is the MinnKota Terrova 54" 24V, 80lb, Manual Deploy
  • Upgrade to MinnKota iPilot Terrova QUEST (brushless, 24V, 90lb, 60″, Manual Deploy)
  • Upgrade to MinnKota Rip Tide iPilot INSTINCT (brushless, 24V, 90lb, 60″, Auto Deploy)
  • Upgrade to Power-Pole MOVE (brushless, 24V 78lb, 52″ shaft, Manual Deploy)
  • Upgrade to SIMRAD RECON (24V, 54″ shaft, Manual Deploy)
  • Upgrade to GARMIN Force Kraken (24V, 48″ shaft, Manual Deploy)
Trailer
  • Aluminum Dual Axle Trailer (includes all ss hardware, ss hubs, spare tire assembly, step-on fenders custom fit “driver-on” bunks, and ss cad disc brakes)
  • Aluminum Wheels
  • Removable or Swing-Away Tongue
Electronics Package *The standard electronics package is the SIMRAD 1ea NSS 9" MFD, SS60 600W thru hull transducer, and 2-1 active imaging transducer
Marine Stereo Package (Includes Fusion head unit, 2ea JL Audio 7.7" speakers and all wiring and installation)
  • Upgrade – two additional JL Audio 7.7″ speakers
  • Upgrade – JL Audio 400/4 amp
  • Upgrade – to sub package: one JL Audio 10″ subwoofer with audio amplifier
SIMRAD Electronics Package Additions
  • Upgrade to SS75 thru hull CHIRP transducer
  • Upgrade to NSS 12″ MFD
  • SIMRAD WM-4 Sirius-XM Satellite Weather Module and Antenna
  • SIMRAD VHF RS40 with 4ft antenna
GARMIN Electronics Package Options
  • Upgrade to GARMIN Electronics Package (Includes 1ea 10″ 1042xsv MFD, B60 600W thru hull transducer, and Side and Downscan transducer. Includes all wiring and installation)
  • Upgrade to B75 thru hull CHIRP transducer
  • Upgrade to 12″ 8612xsv MFD
  • GARMIN GXM-54 Sirius-XM Satellite Weather Module and Antenna
  • GARMIN VHF 215 with 4ft antenna
Aluminum Fabrication *The standard aluminum is a powder-coated helm & poling platform with non-slip steps and two welded rod holders
  • Additional rod holder welded to tower frame (pair)
  • Cup holder welded to tower frame (pair)
  • Knife/plier/cup holder combo welded to tower frame (pair)
  • Removable casting platform (includes flush ss base and turnbuckle)
  • Removable casting seat (cushioned stool, Defender flush mount, turnbuckle, backing plate)
  • Defender flush mount only (includes flush base, removable eye, and backing plate)
Anchoring
  • Upgrade standard single 8ft Power Pole Blade to dual Power Pole 8ft (with one pump or dual pumps)
  • Upgrade to single 10′ Power Pole (with wireless remote)
  • Upgrade to dual 10ft Blades
  • Dual Power Pole Bracket (mount to side of jack plate)
Fishing & Rigging
  • Additional SS Rod Holders (flush mounted on deck cap) – $300 (pair)
  • Rod Holder/Cup Holder Combos – $500 (pair)
  • Gunnel cup holders – $200 (pair)
  • Dual drawer cabinet under leaning post
  • Single drawer unit under helm
Upholstery & Seating
  • Removable Pedestal Seat (choice of captain style or bicycle style) (includes flush mount ss base, adjustable cylinder, and matching upholstery)
  • Bench Seat with Removable Backrest (includes dry storage and removable bench cushion)
  • Composite seat pod with one Llebroc (includes two armrests) and dual drawer polymer tackle storage
Covers & Enclosures
  • Custom Full Boat Cover (choice of color)
  • Extended Sides (full boat cover)
  • Cockpit Bimini Top (choice of color, includes boot)
  • Helm Bimini Top (choice of color, includes boot)
  • Console Cover (choice of color, covers entire composite helm)
  • Combo Cover (choice of color, covers console, backrest, tower)
  • Life Jacket Storage
Lighting & Plumbing
  • Underwater Lights LED – Pair
  • Upgrade Underwater Lights to Spectrum
  • Cockpit Lights LED (set of 4)
  • Upgrade Cockpit Lights to Spectrum
  • Spreader Lights (high intensity, LED) – $500ea
  • Lumitec Razor Light Bar (low profile, curved 18″)
  • Recirculating Live Well Pump
  • Clear Acrylic Release Well Lid or Bait Well Lid (with etched logo)
Deck & Utility
  • Pull-Out Ladder (3-step)
  • Armstrong Dive Ladder (3-step removable)
  • Fly rod tubes (set of 4)
  • Helm Pad (Sea Dek)
  • 12V Accessory Outlet Mounted/Wired Inside Console
  • Upgrade Batteries to AGM – $270ea
  • Forward Corner Steps
  • Bulkhead tackle storage (includes 3 plano trays, flush mounted into bulkhead)
  • 20′ Fiberglass Push Pole
  • 21′ Carbon fiber Push Pole
  • Midship cleats (pair)
Center Console - October 2025

Side View

Arial Side View

Front View

Rear deck

Helm seating

GS20_front deck

GS20_Console seating

Fwd storage

Front deck

Console

Center baitwell

Captains Elevated Helm - June 2025

Biminis up

Port aerial

Port bow aerial

Under gunnel sea dek

Transom view

Starboard plano storage

Pull out ladder

Port drawer

Poling platform

Helm seat

Helm seat storage

Helm pad

Cooler

Front deck

Console

Cockpit

Bilge access

Captains Elevated Helm - October 2022

Port side profile

Starboard side profile

Casting platform

Transom view

Tackle storage

Rear speaker and flyrod tubes

Pull out tub

Port side aerial

Port livewell

Helm seat

Front seating

Front deck

Front casting platform

Console

Console access

Console aerial

Anchor locker

Center Elevated Helm - August 2019

Side arial

Starboard aft profile

Side profile

Tackle storage

Under gunnel sea dek

Redfish sea dek

Rear tower

Rear hatches open

Livewell

Helm

Helm seat

Front deck

Front cooler seating

Building Boats — and a Family of Satisfied Owners.

I have used my GulfShore 20 for the past 15 years fishing inshore and near shore on the Gulf of Mexico and upper East coast of Florida for tarpon and redfish. I have pulled the boat to Gulfport Mississippi to fish for monster wintertime reds. I have fished the creeks and bays near Waccasassa, the Tampa Bay Area, Chokoloskee down to the Everglades, and out to the Marquesa Island west of Key West. This boat has done it all and done it well.”

Allen Brasington Repeat Customer for over 15 years

Start Your Journey

Share your information below.
Or call us at (352) 447-1330

This field is for validation purposes and should be left unchanged.

More from the GulfShore Collection